Genuine Racor 900FH Diesel Fuel Filter ( See-Through Bowl)

Racor 900FH diesel turbine fuel filter is designed to protect your precious engine components from various contaminants such as dirt, rust, algae, asphaltines, varnishes and water.

The Racor 900FH marine turbine is designed to be fitted on the vacuum side of the fuel transfer pump for maximum efficiency. The Racor turbines work through a three stage process; Separation Coalescing & Filtration explained below.

• Stage One: Separation: As fuel enters into the filter assembly; it moves through the turbine centrifuge and spins off large solids and water droplets which fall to the bottom of the collection bowl.
• Stage Two: Coalescing: Small water droplets bead-up along the sides of the chamber and on the element, once heavy enough these too fall into the bottom of the collection bowl.
• Stage Three: Filtration: Algae, rust and dirt are then filtered from the fuel by the Aquabloc element, as the elements are waterproof they are much more effective and long lasting than water absorbing elements.

The Racor 900FH diesel filter comes complete fitted with a see-through bowl and a 10 micron element. The turbine has a maximum flow rate of 341 LPH through a port size of 7/8”-14 UNF.

Replacement Racor turbine elements (2040 series) are available to order with various micron ratings. Racor 2040 turbine elements measure 110mm diameter x 118mm high.

Specifications:
Racor 900FH Turbine Filter Overview:
Maximum flow rate: 341 LPH (90GPH).
Application: Diesel. Port size: (SAE J1926) 7/8"-14 UNF.
Dimensions (H x W x D): 432mm (17”) x 152mm (6”) x 178mm (7”).
Clean pressure Drop: 0.25PSI (1.7 kPa).
Maximum pressure: 15PSI (1bar).


The Equivalent Non Genuine 900FG works on the same principal as the Genuine 900FG

But is supplied with

A Fitting kit for the Diesel filter water separator.
A Standard Racor 2040 10 micron filter element.
Every filter is supplied 1/2" compression adaptors and 10mm od hose barbs.