The 2,2 kW diesel heater has extremely low power consumption - only 0,9 A at maximum power.
Despite of the low power consumption, the air volume capacity is better than in comparable heaters of 2kW in the market. Better air volume ensures good drying effect and heat deviation.
The effect output per consumed amount of amps is best in it's class. Therefore the heater is ideal for sailing boats.
Thanks to the laminar burn process and especially silent main blower, the sound level is equal to the level of whispering in a library. Furthermore there is no combustion noise, so the boat next to yours can also enjoy the silence.
Durable, brushless blower motors assure long lifetime and minimizes the sound level.
22 Dt can be installed into engine compartment. With the help of two air inlets you'll get fresh air and strengthen the heating effect. This happens when taking fresh air from outside and cabin air from inside to circulate the heat.
The Wallas heater 30DT
includes: heater, control panel, mounting bracket, 4 m of the fuel hose, fuel filter, 4 m power cable and the fuse box with fuse.
The Wallas heater with a Marine Installation kit will include (Marine kit sold seperately)
- Wallas 22DT Heater
- The heater box includes: heater, control panel, mounting bracket, fuel hose, fuel filter, power cable and the fuse box with fuse.
- 1 x Control Unit
- 1 x Exhaust Hull fitting
- 1.5m x Exhaust tube
- 10m x 75mm Warm air tube
- 1 x Dip Tube (fuel tank)
- 2 x Warm air outlet grills
 |
| 6-9 m |
